|
4-channel PA amplifier with DSP & SMPS, 4 x 800 W, 4 x 400 W
Features:
- Efficient Class D technology
- Full configuration and real-time network communication via the built-in Ethernet interface
- The intelligent software for allows convenient control with a computer
- Presets are easy to store, transfer and manage
- Up to 100 user presets storable in the device via software
- Digital signal processor FIR Filter
- Sample rate: 96 kHz
- 2 operating modes can be selected (stereo or bridge/100V)
- Extremely low weight and height due to integrated switch mode power supply
- Level control per channel
- 10-band parametric EQ per input and output
- Parametric filters can be set as Bell, High Shelf, Low Shelf, Notch, Allpass, Band Pass, High Pass, Low Pass
- Additionally up to 48 dB/octave for all outputs with Linkwitz-Riley filter
- Output limiter with adjustable limits and automatic attack and release settings as overload protection for your amplifying system
- LCD display
- 2 Ethernet ports for easy wiring
- The device can be connected via RJ-45 (F) mounting version to the PC in connection with DXO Software, firmware can be updated
- The device is cooled by temperature-controlled fan
- Highly efficient Air flow from front to rear
- (19") 48.3 cm rack installation 2 U
- For application areas such as: Clubs/dancing school, Installation, mobile use, mobile djs / entertainer, restaurants, bars and hotels, sports centres/gyms
- Package contents
- 1 x amplifier, 1 x power cord, 1 x user manual
Specifications:
- Power supply: 100-240 V AC, 50/60 Hz
- Power consumption: 600 W 1/8 power
- Protection class: Protection class I
- Output power:
- 4 x 800 W RMS (4 ohms)
- 4 x 400 W RMS (8 ohms)
- 2 x 1500 W RMS bridged (8 ohms)
- 4 x 200 W RMS (100 V)
- 2 x 1500 W RMS bridged (100 V)
- Power connection: Mains input via P-Con (blue), mounting version power supply cord with safety plug (provided)
- Cable length: 1,2 m detachable
- Frequency range: 20 - 20000 Hz
- S/N ratio: >119 dB
- THD: <0,05 % at 1 kHz
- Network connection: Protocol: Ethernet TCP/IP via 2x RJ-45 (F) mounting version
- DSP: Digital signal processor FIR Filter
- Cooling: 1 x temperature-controlled fan , Air flow from front to rear
- Impedance:
- Input: 20 kOhm , bal.
- Input: 10 kOhm , unbal.
- Gain: 28,2 dB, Bridged 34,2 dB
- Filter: Linkwitz-Riley; Butterworth; Bessel; 6db/oct; 12db/oct; 18db/oct; 24db/oct; 48db/Okt
- Delay: Input: 0 - 2000 ms
- Housing color: Black
- Sample rate: 96 kHz
- Circuitry: Class D
- Damping factor: 350
- Display type: LCD display
- Control elements: Power switch, encoder, level control per channel, mode switch (stereo / bridged/100V), menu
- Controls: Softstart; overheat; overload; short-circuit; DC voltage
- Status LED: Power, signal, clip, bridged, protect
- Connections:
- Input: Line via 4 x 3-pin XLR
- Link: Line via 4 x 3-pin XLR
- Output: DSP via 4 x 3-pin XLR (F) mounting version
- Output: Speaker via screw plug-in terminal
- Output: 4 x speaker built-in socket (F)
- Output: Speaker (bridge) via 2 x speaker built-in socket (F)
- 2 x RJ-45 (F) mounting version
- PC connect: DXO Software via RJ-45 (F) mounting version, firmware can be updated
- Housing design: (19") 48.3 cm rack installation 2 U
- Dimensions:
- Width: 48,3 cm
- Depth: 40,8 cm
- Height: 8,8 cm
- Weight: 7,60 kg
- Operating system: Win XP, Win Vista, Win 7, Win 10, Win 11, OS X 10,5 or higher
|