|
Practical cable tester for telephone and network lines. The device tests all wire pairs and detects faults such as open, short-circuited, crossed or twisted wire pairs as well as split pair faults within seconds. With the associated remote unit, a cable or line can also be tested after installation. The operation is simple, the clear display is via LEDs. A battery is not included. The PoE testing unit shows if PoE voltage is present and if so, on which wire pairs (1-2/3-6 or 4-5/7-8). Plus PoE display.
Features:
- Test the correct pin configuration of 10Base-T, 10Base-2 Ethernet cable, RJ45/RJ11 modular cables, 258A, TIA 568A/568B and Token
Ring Cable etc
- PoE test supports IEEE802.3af and IEEE802.3at
- Easy to read cable status and verify cable continuity, open short and miswire
- With remote kit, it can remotely test cable far away either on wall plate or patch panel
- Test the grounding
- With auto or manual scan
- Operates with 9 Volt block battery
Specifications:
- Cable tester for RJ11, RJ12, RJ45, BNC & PoE
- Master & remote unit
- Various LEDs for status
- Suitable for patch cords and installed cables
- Tests continuity, connection, wiring and shorts
- Identifies the existence and type of PoE
- Power: 9V block battery (not included)
|